LED MOVING LIGHT 제품소개 글답변

이름필수 비밀번호필수 이메일 홈페이지

옵션

html

제목필수

내용필수

웹에디터 시작

> 
 > 
 > Source
> Light source: 12x 15W RGBW multichips
> 
> LED Life Expectancy: minimum 60.000 hours
> 
> Typical Lumen Maintenance: 70% @ 60.000 hours
> 
> Optical system
> Robe’s proprietary optical design
> 
> Beam angle: 7°
> 
> Fixture total lumen output: 3.220 lm
> 
> Light output: 5.960 lm @ 5 m
> 
> Dynamic Effects and Features
> Colour mixing mode RGBW or CMY
> 
> 3 individually controllable LED zones
> 
> Virtual Colour Wheel: 237 colours including whites (2.700K, 3.200K, 4.200K, 5.600K and 8.000K)
> 
> Tungsten lamp effect at whites: 2.700K and 3.200K (red shift and thermal delay)
> 
> Colour rainbow effect with variable speed
> 
> Pre-programmed random strobe & pulse effects
> 
> Electronic strobe effect with variable speed up to 20 Hz
> 
> High resolution electronic dimming: 0 - 100%
> 
> Control and programming
> Setting & Addressing: two-row LCD display & 4 control buttons, stand-alone operation with 6 editable programs (each up to 25 steps)
> 
> Protocols: USITT DMX-512, RDM
> 
> Wireless CRMX™ technology from Lumen Radio: On request
> 
> DMX Protocol modes: 6
> 
> Control channels: 35, 19, 14, 9, 35, 37
> 
> Pan/Tilt resolution: 8 or 16 bit
> 
> RGBW or CMY: 8 or 16 bit
> 
> Dimmer: 8 or 16 bit
> 
> Movement
> Pan movement: 450°
> 
> Tilt movement: 300°
> 
> Automatic Pan/Tilt position correction
> 
> Thermal specification
> Maximum ambient temperature: 45°C (113°F)
> 
> Maximum surface temperature: 80°C (176°F)
> 
> Minimum operating temperature: -5°C (23°F)
> 
> Electrical specification and connections
> Power supply: Electronic auto-ranging
> 
> Input voltage range: 100-240 V, 50/60 Hz
> 
> Power consumption: Max. 200 W at 230 V / 50 Hz
> 
> Power in/out connector: Neutrik powerCON in/out
> 
> DMX and RDM data in/out: Locking 5-pin XLR
> 
> Ethernet port in: RJ45
> 
> Mechanical specification
> Height: 314 mm (12.4")
> 
> Width: 233 mm (9.2")
> 
> Depth: 149 mm (5.9")
> 
> Weight: 4.5 kg (9.9 lbs)
 > 
 >

웹 에디터 끝

파일 #1

파일 #2

자동등록방지

자동등록방지 숫자를 순서대로 입력하세요.

취소